Frozen pipes may be somewhat common in the wintertime. If your pipes do freeze, you want to check and see if the pipes are busted or cracked. If your pipes are frozen, you can use a hair dryer to try and thaw out the pipes. However, if this will not work, you will need to call in a local plumber who may either try and thaw the lines out another way or they may just end up replacing the section of the line that is broken.
When you get to the house stand if front of the toilet and locate the water shut off valve. Should be down below the toilet on the wall. Just turn it off (righty-tighty) completely and flush the toilet. All the water should have left the tank, well at least most of it. If there is remaining water line repair get it out with paper towels or a rag. The important thing is that no more water came in. If it did then your valve is not shut all the way or not working and you need additional help.
There may be more pipes in your home than you think. Your home gets all the water it needs, either from a municipal water connection or from a well, through one central pipe, which branches out and distributes water to all the other places in your home that need it. These pipes run under your floors and sometimes through your walls. Most of the time, they take care of themselves and you never need to think about them.
Service magic only let's licensed and insured tradesmen advertise on the site so that would be a great place to start. I would recommend getting at least three different quotes from different companies. This way you have an exact price of how much your works are going to cost and you will know exactly what you are getting for your money. You will also get the very best price for that work. Most plumbers will often try and sell you work that maybe you don't need as they are trying to make a living.
Be certain that the bathroom exhaust fan vents to the outdoors, not into the house or attic. If the exterior vent dampers don't operate properly or water line repair don't seat well have them fixed or replaced.
For a newly installed icemaker, you will need up to 24 hours to let the machine function and cool down. A newly installed icemaker may not work until the ice mold temperature has dropped to about 15F - 16F degrees. If you have just added a water line to the refrigerator, it may take up to about an hour and a half for the machine to start working. Also, a newly installed water line may have air in the line. It can sometimes take a few ice making cycles to clear the line of air.
Sometimes there can be complications of broken toilet flanges, closet bolts or rotted sub-flooring. If you find any of that in your situation, it will need to be repaired before reinstalling the toilet.